
Production of long-barb CBT, clipped cross-type and flat wrap razor wire for correctional and public safety facilities, with installation, training and warranty.
Prisons, remand centres, immigration removal centres, police and gendarmerie facilities and other high-security public buildings are where perimeter security is at its most complex. At these sites the barrier has to work against threats from outside and, at the same time, against escape attempts from within. That two-way requirement drives the choice of material, the layout of the obstacle and the maintenance plan.
AKOR Makina has more than 21 years of experience designing and manufacturing razor wire production lines. Manufacturers, contractors and public agencies that supply perimeter security for public safety buildings use AKOR lines to produce high-security products in their own facilities, to a consistent standard.
Perimeter Security Needs at Correctional Facilities
The perimeter of a correctional facility usually consists of several layers: an inner fence, an outer wall or fence, a continuously monitored sterile zone between the two, watchtowers, lighting and electronic detection systems. The physical obstacle has two jobs here: to delay an escape attempt long enough for staff to notice and respond, and to make any interference from outside as difficult as possible.
Key risks
- Escape attempts: climbing or cutting through a fence or wall, or using improvised tools to get over it.
- Contraband throw-overs: approaching the perimeter to get packages or objects inside.
- Outside assistance: accomplices helping an escape from beyond the perimeter.
- Unauthorised entry to public buildings: out-of-hours attempts at police and court facilities.
Requirements
- High deterrence: long, sharp blade geometry that makes even contact difficult.
- Cut resistance: a construction in which the loops are tied together so that a single cut will not open it.
- Two-way effectiveness: a barrier that is equally effective from inside and outside.
- Easy maintenance: damaged sections replaced quickly without disrupting the facility's routine.
- Long service life: corrosion resistance for material that will stay outdoors for years.
Razor Wire Solutions for High-Security Facilities
Long-barb CBT profiles
With their blade length and sharpness, long-barb CBT profiles stand out in high-security applications. They are extremely difficult to grip or climb over, which is why they are widely chosen for inner perimeter fences and sterile zones. On less critical outer lines, short-barb BTO profiles keep costs in balance.
Clipped cross-type concertina
In cross-type coils, adjacent loops are joined with clips at set points. When the coil is deployed it forms a dense, three-dimensional mesh. Cutting one point is not enough to open it, which significantly extends the delay an escape attempt will face.
Flat wrap and wall-top applications
Flat wrap razor wire on the top of concrete perimeter walls and on fence faces provides an effective final anti-climb layer. Combined with concertina mounted on wall-top brackets, it adds both height and depth to the obstacle.
Layered obstacles in the sterile zone
In the sterile zone between the inner and outer perimeters, concertina or pyramid configurations laid on the ground slow down anyone trying to cross and buy time for the surveillance team. This layer is the most critical link in the detect, delay and respond approach.
The AKOR Solution: Which Machines, and Why
| Machine | Role in public safety projects |
|---|---|
| Eccentric Press Line AKR-EP-3090 | 60 t, 60-80 strokes/min, 12-15 strip BTO-CBT die for both long- and short-barb tape |
| Horizontal Joining Line AKR-HB-2120 | 150-400 kg/h, concertina from 300 to 1100 mm diameter |
| Clip Production Line AKR-KM-1700 | 6,000 clips/h for cross-type coils on a 20-tonne eccentric press |
| Clip Gun AKR-KT-1000 | 6 bar pneumatic, 3 kg, 25-clip magazine for fast, ergonomic clipping |
| Flat Packaging Machine AKR-JT 9200 | Packing flat wrap products for walls and fence tops |
Because cross-type production is central to public safety work, the clip production line and the clip gun are essential parts of this configuration. Running a 25-station progressive die, the clip line keeps the joining line supplied without interruption, while the lightweight pneumatic gun reduces operator fatigue and helps keep clipping quality consistent throughout the shift. The servo strip feeder on the eccentric press line keeps the blade pitch precise and repeatable. Where space is tight, the AKR-HB-2110 vertical joining machine is worth considering.
Capacity and Investment Planning: A Worked Example
The following is an illustrative scenario for a manufacturer supplying several public safety projects; actual figures depend on the product mix.
- 1 × AKR-HB-2120, averaging 300 kg/h
- 2 shifts a day, 16 operating hours
- Around 75% efficiency, allowing for clipping time on cross-type coils
On these assumptions, daily output is roughly 300 × 16 × 0.75 = 3,600 kg, or about 79 tonnes a month over 22 working days. Over the same hours, the clip production line can in theory produce around 96,000 clips, which in most scenarios is enough to supply more than one joining line. The number of clips per coil depends on the product design, so the exact figure is worked out at the quotation stage. You can estimate your project length with our razor wire length calculator.
Installation, Training and After-Sales Support
AKOR installs and commissions the machines at your facility, and the first production runs take place under the supervision of our specialists. Operators receive hands-on training in pressing, joining and clipping. HMI screens are supplied in Turkish and English, with Ukrainian, Russian and Arabic on request. AKOR products carry a one-year warranty against manufacturing defects, with spare parts and technical support provided by the AKOR service team. Technical documents are available as PDFs on each machine page.
Frequently Asked Questions
Which machines do we need to produce cross-type coils?
In addition to the core production line, you need a clip production line and a clip gun. The AKR-KM-1700 makes 6,000 clips an hour, and the AKR-KT-1000 pneumatic gun, with its 25-clip magazine, joins the loops quickly.
Which blade profile is recommended for high-security sites?
Long-barb CBT profiles are widely chosen for critical sections such as the inner perimeter and the sterile zone, with BTO profiles on less critical outer lines. The final choice should follow the specification of the agency concerned.
Can the same facility produce both concertina and flat wrap?
Yes. The tape produced on the press line can be formed into concertina on the joining line or used for flat wrap products, which are then packed on the flat packaging machine.
How long does operator training take?
Training is planned around the scope of the line and the experience of your staff. It is built into the installation and commissioning process and delivered hands-on, during real production.
Work With Us on Your Public Safety Projects
A reliable perimeter at correctional and public safety facilities starts with properly made material. Share your specification and target capacity to request a quote, or contact our support team for a technical assessment.
Cover photo: Ministry of Defense of Ukraine · CC BY-SA 2.0 · Wikimedia Commons
Scope of service
- Two-way protection against escape and outside interference
- Cut-resistant clipped cross-type coils
- High deterrence with long-barb CBT profiles
- Flat wrap for wall and fence tops
- 24-month warranty and at least 10 years of spare parts
Correctional & Public Safety — get a quote
Fill in the form and we will get back to you as soon as possible.