Industrial Sites & Warehouses

Cost-effective perimeter security for factories, industrial estates, warehouses and construction sites

Industrial Sites & Warehouses

Razor wire production lines for factories, warehouses, industrial estates and sites: wall-top flat wrap, fence-top concertina and compact lines.

Factories, plants on industrial estates, warehouses, distribution centres, chemical and fuel facilities, mining sites and large construction sites all hold valuable machinery, raw materials and finished stock. Many of them run with minimal staff, or stand completely empty, at night and over holidays. Theft, vandalism and trespass cause direct financial loss, and they also lead to production stoppages, late deliveries and workplace safety risks. For industrial businesses, perimeter security is not just a cost line: it protects operational continuity.

AKOR Makina has been designing and manufacturing razor wire production lines for more than 21 years. Fencing and perimeter security companies serving industrial clients, as well as industrial groups that want to supply their own network of sites, use AKOR lines to produce razor wire in-house.

Security Needs at Industrial Sites

The perimeter of an industrial site is usually a concrete wall, panel fencing or chain link. These mark the boundary, but on their own they may not stop a determined intruder. Razor wire added to the top or face of the fence makes climbing far harder, and when combined with cameras and alarms it buys the time needed to detect a breach and respond.

Key risks

  • Theft of stock and materials: loss of scrap metal, cable, fuel, finished goods and equipment.
  • Out-of-hours trespass: intrusions into areas left empty at night and on holidays.
  • Vandalism and sabotage: damage to machinery, vehicles and infrastructure.
  • Equipment security on construction sites: temporary sites with constantly changing perimeters that are hard to protect.
  • Workplace safety: accidents caused by unauthorised people entering hazardous areas.

Requirements

  • Cost efficiency: a reasonable cost per metre across long perimeters.
  • Compatibility: easy fitting to walls, panel fences and chain link.
  • Visual balance: solutions that do not dominate the appearance of sites in urban areas.
  • Fast supply: short lead times when new plants or construction sites open.
  • Safe installation: suitable mounting heights and warning signs on sections close to pedestrian traffic.

Razor Wire Solutions for Industrial Sites

Flat wrap for wall tops and fence faces

Fitted flat along the top of concrete perimeter walls and panel fences, flat wrap razor wire is one of the most popular solutions at industrial sites. It takes up little space, has a limited visual impact and is very effective at stopping climbers.

Fence-top concertina

Concertina coils mounted on brackets along the top of the fence add height and depth to the barrier. They give stronger protection at high-value storage areas and at sites far from town.

Ground concertina and temporary perimeters

On construction sites, open storage yards and during expansions, ground-laid concertina provides a fast temporary perimeter until a permanent fence is in place.

BTO and CBT profiles

For most industrial applications, short-barb BTO profiles provide adequate, economical protection. In critical areas such as fuel stores, chemical storage or high-value materials warehouses, long-barb CBT profiles are worth considering.

The AKOR Solution: Which Machines, and Why

For a manufacturer serving the industrial perimeter security market, what matters is producing both flat wrap and concertina in the same facility, at low running cost and in flexible order sizes. The configuration we recommend is shaped around that need:

MachineRoleKey figures
Eccentric Press Line AKR-EP-2090Barbed tape production40 t, 120-140 strokes/min, 6-11 strip BTO-CBT, 12-22 cassettes, 7 kW
Hydraulic Press Line AKR-HP-2080Compact alternative for tape production30 t, 100-110 strokes/min, 3-6 strip BTO, 7 kW
Horizontal Joining Line AKR-HB-2120Concertina production150-400 kg/h, 300-1200 mm, 4.5 kW
Vertical Joining Machine AKR-HB-2110Space-saving concertina production150-350 kg/h, 4 kW
Winding Machine AKR-JS-1110Winding wire for storage and shipment0.75 kW
Flat Packaging AKR-JT 9200 / Concertina Packaging AKR-JTA 9300Packing flat wrap and concertinaReady-to-ship packs

If you want to produce both short- and long-barb profiles, the AKR-EP-2090 eccentric press line with BTO-CBT dies is the right place to start. If a compact start with BTO profiles only suits you better, the AKR-HP-2080 hydraulic press line is a good alternative. On the joining side, we recommend the horizontal line where there is enough floor space and the vertical machine where space is tight. The horizontal joining line handles core wire from 400 to 1,800 MPa, with a standard diameter of 2.4-2.5 mm and an optional range of 2.0-3.0 mm.

Capacity and Investment Planning: A Worked Example

The following is an illustrative scenario for a regional fencing company serving industrial estates; real figures depend on the product mix.

  • 1 × AKR-EP-2090 eccentric press line (7 kW)
  • 1 × AKR-HB-2120 horizontal joining line (4.5 kW), averaging 200 kg/h
  • Single 8-hour shift, around 85% efficiency allowing for changeovers between flat wrap and concertina

On these assumptions, daily concertina output is roughly 200 × 8 × 0.85 = 1,360 kg, or about 30 tonnes a month over 22 working days. The press and joining line together draw about 11.5 kW of installed power, which means the investment fits the existing electrical supply of most industrial workshops. As order volumes grow, capacity can be raised with a second shift or a second joining line. To work out the length for your projects, use our razor wire length calculator.

Installation, Training and After-Sales Support

AKOR engineers install and commission the machines at your facility and run the first production with you. Operators and maintenance staff are trained hands-on in die changes, setup and routine maintenance. HMI screens are in Turkish and English, with Ukrainian, Russian and Arabic on request. AKOR products carry a one-year warranty against manufacturing defects, with spare parts and technical support provided by the AKOR service team. Our ISO 10002:2018 customer satisfaction management system ensures your requests are logged and followed up. Technical documents are available on our documents page.

Frequently Asked Questions

Which type of razor wire is most popular for industrial sites?

Flat wrap is the most common choice for wall tops and fence faces, and concertina for fence tops. BTO is sufficient as the blade profile in most applications, with CBT an option for critical areas.

Can we start production in a small workshop?

Yes. A compact configuration made up of the hydraulic press line and the vertical joining machine lets you start production in limited space. As demand grows, you can move up to an eccentric press and a horizontal joining line.

Can flat wrap and concertina be made on the same line?

Yes. The barbed tape from the press line is formed into concertina on the joining line, while winding and flat packaging equipment handle flat wrap products, so both can be produced in the same facility.

Make a Strong Entry into Industrial Perimeter Security

If you provide perimeter security for factories, warehouses and construction sites, producing razor wire in-house shortens lead times and strengthens your product range. Share your goals to request a quote, or contact our support team with technical questions.

Cover photo: Ministry of Defense of Ukraine · CC BY-SA 2.0 · Wikimedia Commons

Scope of service

  • Flat wrap and concertina for walls and fence tops
  • Compact, low-power line configurations
  • Planning built around regional fencing businesses
  • Choice of BTO and CBT blade profiles
  • 24-month warranty, at least 10 years of spare parts

Industrial Sites & Warehouses — get a quote

Fill in the form and we will get back to you as soon as possible.

Frequently asked questions

Which razor wire types can your machines produce?
All blade types from BTO-10 to CBT-65, in concertina, spiral and flat forms from 300 to 1100 mm diameter. The die series is selected according to blade type.
What is the capacity of a production line?
Our joining lines produce 150-400 kg/h depending on the model. Overall capacity is configured to your target together with the press line and number of cassettes.
Do you provide installation and training?
Yes. Our technicians install and commission the machines on site and give your operators hands-on training.
How long is the warranty?
Our machines carry a one-year warranty against manufacturing defects; spare parts and technical support are provided by our service team.
Which countries do you export to?
Our market network reaches 47 countries across Europe, the Middle East, Africa and Central Asia. Exports comply with applicable export-control rules.
@akordefencemachinery info@akormakina.com WhatsApp