Flat Razor Wire Winding & Packaging Machine

Packaging Machines

Product Code: AKR-JT 9200

Flat Razor Wire Winding & Packaging Machine

Nests and wraps flat razor wire in stretch film or paper with a piston-driven tension system; 1100 mm wrapping width, 1.5 kW.

  • Piston tension and backstop
  • Nested wrapping
  • 1100 mm wrapping width
  • Multi-product compatible
  • 1.5 kW, single operator

AKR-JT 9200 · 2D schematic animation

How it works

The AKR-JT 9200 Flat Razor Wire Winding & Packaging Machine packs and nests flat-form razor wire using packaging materials such as stretch film or paper. Flat razor wire has a different geometry from spiral products, so during wrapping it is essential that the product is properly backed up and wrapped at the right tension. The AKR-JT 9200 is built for exactly this, with a piston-driven tension and backstop system.

The piston design of the tension and backstop adjustment keeps changeover time to a minimum when product sizes change. A 1100 mm wrapping width covers wide panels in one pass, while the PLC-based control panel keeps the wrapping process orderly and repeatable.

How it works

  1. Size setting: the machine is set to the size of the flat product; the piston backstop is adjusted quickly to hold the product in position.
  2. Packaging material: stretch film or paper is loaded into the compartment and the lid is closed.
  3. Product placement: the flat razor wire is placed in the machine, with products arranged for nesting.
  4. Tension setting: the piston tension system is set so the wrap holds the product firmly without damaging it.
  5. Starting turns: the packaging material is attached and rotated once or twice in jog mode to check the settings.
  6. Automatic wrapping: the speed is set and wrapping begins with the start button; when complete, the stop button halts the machine.

Key features

  • Piston tension and backstop: minimal adjustment time between product sizes, saving time.
  • Nested wrapping: compact, orderly packing of flat products.
  • Large wrapping area: 1100 mm wrapping width and 400-1200 mm wrapping size.
  • Multi-product compatible: a mechanically controlled design that adapts to a variety of products.
  • PLC-based control: the same quality and neatness on every pack.
  • Low energy: 1.5 kW total power and a single operator.

Applications and products

The AKR-JT 9200 is used to wrap flat razor wire panels — and other products suited to this form — before shipment. Since flat razor wire is chosen for wall surfaces, fence panels and areas needing a security barrier of limited depth, it is important that the product keeps its shape in transit. Nesting makes the product compact, saving space in storage and container loading, while wrapping helps installation crews handle it more safely.

Spiral or flat?

Both wrapping machines handle 400-1200 mm wrapping sizes and 300-1200 mm products with a single operator; the difference lies in the product form. The AKR-JTA 9300 is built for spiral coils, with a 300 mm wrapping width, digital-screen control and fully opening covers (3 kW). The AKR-JT 9200 is built for flat products, with a 1100 mm wrapping width, piston tension and backstop, and nested wrapping (1.5 kW). Plants producing both forms can run the two machines side by side.

Technical summary

SpecificationAKR-JT 9200
Wrapping size400-1200 mm
Wrapping width1100 mm
Product diameter300-1200 mm
ControlPLC-based control panel
Product useMulti-product compatible, mechanically controlled
Total power1.5 kW
Operators1

Installation, training and maintenance

The machine is set up and tested at our factory before shipment; installation, commissioning and operator training are carried out on site by our team. AKOR products carry a one-year warranty against manufacturing defects, with spare parts and technical support provided by the AKOR service team.

  • Place the machine on a flat, levelled floor with at least 0.5 m of clearance around it.
  • Operate it in a dry, enclosed area free from humidity, at 10-30 °C.
  • Have electrical and air connections made by authorised personnel, with a phase-protection relay, residual-current relay and earth connection.
  • Use pneumatic conditioner oil in the pneumatic system and check the piston connections periodically.
  • Use the stop button only in an emergency, and wait for the motor to stop before restarting.
  • For any situation not covered in training, contact the authorised company.

Machines it works with

The flat wrapping machine sits at the shipping stage of the AKOR line. The bladed ribbons that make up the product are cut on the Eccentric Press Line or the Hydraulic Press Line, joined to the wire on the Horizontal Joining Line or the Vertical Joining Machine, and fixed with the Clipping Tool. For spiral coils, the Spiral Wrapping Machine and the Coiling Machine are used together.

Let's plan your packaging

Share your flat product dimensions and daily packing volume, and we will recommend the right configuration. Request a quote or contact our support team.

Wrapping size400-1200 mm
Wrapping width1100 mm
Product diameter300-1200 mm
ControlPLC-based control panel
Total power1,5 kW
Operators1
  • Teknik Föy — Düzlemsel Ambalaj / DatasheetPDF Download
  • Kullanım Talimatı — Ambalaj Makineleri / Operating Instructions (EN)PDF Download
  • Kullanım Kılavuzu / Operating Manual (TR)PDF Download

Get info / request a quote

Write your question or requirement; our team will get back to you shortly.

Similar Products

@akordefencemachinery info@akormakina.com WhatsApp